Tag Archives: 8-bit codec
This part will focus on post production, usual step for any kind of video work you would like to present to your audience.
The very first bit of the whole chain is to have all your clips matched in terms of luminance. In the IRE scale the blackest point has to be set to 0, while the whitest to 100.
This way you know that anything below 0 will be totally black and anything above 100 will be pure white; both 0 and 100 are the threshold to get any detail in your picture. You have to do this work for all the cuts in your final editing, plus balancing out the RGB channels. It’s quite a tedious work, but once it’s done, you’ll know that the whole piece will be like one.
The next step would be to fix any issues, like under or over exposed areas of your footage… hopefully you will not have to deal with it, but chances are that it might happen if you are shooting solo or on a very small production. Especially doing exteriors, it’s difficult to control the action and the tech part as well. Never mind if you are shooting manual as well, we film-makers mostly do.